Jun 06, 2025 Leave a message

Difference between extruded fin tube and wound fin tube

Extruded fin tube and wound fin tube are two common types of fin tubes. Their differences are mainly reflected in the following aspects:

1. Manufacturing process
Extruded fin tube: Through a special extrusion process, the fins are tightly attached to the base tube. The material is subjected to strong extrusion pressure in the mold, and the shape gradually changes. It is finally extruded into a fin shape that matches the mold cavity, and then assembled with the base tube to form a complete extruded fin tube.
Wrapped fin tube: Cold winding at room temperature is to directly wrap high-quality steel strips or aluminum strips on the steel tube by mechanical force.
2. Structural features
Extruded fin tube: The fins are tightly combined with the base tube and have low thermal resistance. For example, the serrated fin tube of the extruded serrated fin tube is tightly fitted on the surface of the base tube through a precision extrusion process.
Wrapped fin tube: The steel strip near the base tube has obvious wrinkles, and the wrinkle shape allows the steel strip to stand tightly on the base tube by mechanical tension without falling over. The fins of aluminum wound fin tubes are L-shaped or LL-shaped.
3. Performance
Heat transfer performance:
Extruded fin tubes: large heat transfer area, high heat transfer performance, can significantly improve heat exchange efficiency. For example, the serrated shape of the extruded serrated fin tube increases the heat transfer area, while optimizing the fluid flow state, significantly improving the heat exchange efficiency. Compared with ordinary fin tubes or light tubes, more heat transfer can be achieved in a shorter time.
Wrapped fin tube: Due to the limitation of processing technology, the fin pitch is generally larger (ranging from 3.2 to 8mm), and the unit heat exchange area is smaller than that of some extruded fin tubes, but the aluminum wound fin tube can be processed into a smaller pitch (minimum 2.3mm), the unit heat exchange area is larger, the heat exchange effect is within a certain range, and as the service cycle increases, the contact thermal resistance is more obvious.
4. Anti-fouling performance:
Extruded fin tube: Taking the extruded serrated fin tube as an example, its serrated shape makes the fluid form complex flow states such as vortexes during the flow process, which helps to prevent impurities in the fluid from depositing on the fin surface and reduce the formation of dirt.
Wrapped fin tube: The relevant search results do not mention obvious anti-fouling advantages.
Adaptability to thermal expansion and contraction:
Extruded fin tube: The material can withstand the pressure and temperature changes during the heat exchange process, ensuring the stability and reliability of the fin tube, and is not easy to deform under long-term hot and cold conditions.
Wrapped fin tube: Aluminum wound fin tube with insufficient rigidity is not suitable for working environment with large thermal expansion and contraction, and is usually used in systems with relatively stable working environment.
5. Application scenarios
Extruded fin tube: Widely used in various industrial fields, especially in places where efficient heat transfer is required, such as water-cooled walls of boilers in power plants, petrochemicals, refrigeration, thermal power plants, and fan coils of large air conditioners. It can also be used in drying operations in wood, food, paper and other industries.
Wrapped fin tube: Widely used, it can be used in systems with relatively stable working environment, such as hot water heating or cooling. It should be used with caution for steam and heat transfer oil as heating medium. The manufacturing cost is low and the replacement is convenient and timely.
6. Cost aspect
Extruded fin tube: The manufacturing process is relatively complex, involving precise control of extrusion force, temperature and speed parameters, and the cost may be relatively high.
Wrapped fin tube: The processing technology is simple, the material is convenient, and the manufacturing cost is low, but if the hot-dip galvanizing process is used, the cost will increase significantly. Now most of them are sprayed with paint to reduce the cost.

info-400-300info-300-300

Send Inquiry