C250 and C350 hollow tubes are both cold-formed structural hollow profiles under the Australian Standard (AS). The core differences are reflected in strength, composition and applicable scenarios. The following is a specific comparison:
1. Core performance differences
| index | C250 Hollow Section | C350Hollow Section |
|---|---|---|
| Yield Strength | ≥250MPa | ≥350MPa |
| Tensile Strength | ≥300MPa(Reference Low Carbon Steel) | ≥450MPa |
| Material composition | Low carbon steel (carbon content 0.22%~0.29%) | Medium carbon steel (carbon content 0.32%~0.40%) |
| Toughness performance | Excellent plasticity, elongation ≥ 24% | Higher hardness and stronger resistance to deformation |

2. Comparison of processing and durability
Welding and cold processing:
C250: Low carbon properties make it easier to weld and cold bend, without complex preheating process;
C350: High carbon content, welding requires preheating to prevent cracking, and cold processing is more difficult.
Weather resistance:
C350 adds chromium, nickel and other elements, and its corrosion resistance is better than C250, which is more suitable for harsh outdoor environments;
Both require surface anti-corrosion treatment (such as coating) to extend life
3. Applications
| Type | Applications |
|---|---|
| C250 | Light duty shelves, interior decoration frames, low pressure fluid pipelines |
| C350 | High-rise building pillars, heavy machinery frames, vehicle load-bearing components |





