Sep 10, 2025 Leave a message

difference between A500 and A500+

### 1. What is the difference between A500 and A500+?

The primary difference between ASTM A500 and A500+ is the required **Charpy V-Notch (CVN) impact toughness**.
* **ASTM A500** is the standard specification for cold-formed welded and seamless carbon steel structural tubing. It defines mechanical properties like tensile and yield strength but does **not** have a mandatory requirement for impact toughness (though it can be specified as an supplementary requirement).
* **ASTM A500+** is not a separate specification but refers to A500 tubing that has been produced to meet **additional** impact testing requirements. The "+" signifies that the material has been tested and certified to absorb a minimum amount of energy at a specified temperature (e.g., 20 ft-lb at -20°F / 27 J at -29°C), making it suitable for applications where dynamic loading or colder service temperatures are a concern.

### 2. What is the difference between A500 and A513 square tube?

The difference lies in the **manufacturing process** and **intended application**.
* **A500 Square Tube** is produced specifically for **structural** purposes. The standard (A500) governs the final mechanical properties (yield strength, tensile strength) of the finished tube, making it ideal for load-bearing columns, beams, and frames in construction.
* **A513 Square Tube** is produced for **mechanical** purposes. The standard (A513) governs the manufacturing process (electric resistance welded) and the chemical properties of the steel. It is typically used for applications where forming, machining, or fabrication is required, such as in automotive parts, furniture, or machinery, but it is not formally rated for structural load-bearing applications.

### 3. Is A500 steel machinability?

A500 steel has **fair to poor machinability**. It is a low-carbon steel, which generally means it is relatively soft and gummy. This can lead to built-up edge on cutting tools, poor surface finish, and long, stringy chips instead of small, broken ones. While it can be machined (e.g., drilled, sawed, turned) without extreme difficulty, it is not considered a "free-machining" steel like those with added sulfur or lead (e.g., 12L14). Using sharp tools, appropriate speeds and feeds, and cooling lubricant is highly recommended for the best results.

### 4. What is the difference between A500 and 350W?

This is a comparison between an **American standard** and a **Canadian standard** for structural steel.
* **ASTM A500** is the U.S. standard for cold-formed welded and seamless carbon steel structural tubing.
* **350W** is a grade designation under the Canadian standard **CSA G40.21** for structural quality steel. The "W" stands for "Weldable."
The key difference is that **A500 is a product standard (for tubing)**, while **350W is a material grade** (which can be applied to plates, bars, and other shapes). Their mechanical properties (yield and tensile strength) are very similar, making them often used interchangeably in many structural applications, but they are governed by different national standards.

### 5. Is A500 steel magnetic?

**Yes, A500 steel is magnetic.** It is a carbon steel, which is a ferrous material. All ferrous metals, which contain iron, are strongly magnetic and will be attracted to a magnet.

info-225-225info-225-225

Send Inquiry