Jun 10, 2025 Leave a message

Commonly used anti-corrosion layer types for oil and gas transmission pipes

1. Polyethylene adhesive tape anti-corrosion layer
Polyethylene adhesive tape base material is mainly polyethylene, and one side is compounded with adhesive. According to the process method, it is divided into several types such as adhesive liquid coating type adhesive tape, hot melt coating type adhesive tape, co-extrusion thermal composite polyethylene adhesive tape, etc. There are two types of polyethylene adhesive tape anti-corrosion layer structures. One is a composite structure composed of primer, anti-corrosion adhesive tape (inner tape) and protective adhesive tape (outer tape); the other is an anti-corrosion layer structure composed of primer and anti-corrosion adhesive tape.

2. Fusion-bonded epoxy powder anti-corrosion layer
Fusion-bonded epoxy powder anti-corrosion layer, that is, epoxy powder anti-corrosion layer for pipeline anti-corrosion, referred to as FBE anti-corrosion layer or 2FBE anti-corrosion layer, which is a solid, powdered thermosetting epoxy powder that is melted into a film at one time and meets the thickness requirements. The fused epoxy powder anti-corrosion layer has excellent mechanical properties and corrosion resistance, good adhesion and better anti-cathode stripping performance than other anti-corrosion layers, and the anti-corrosion life can be up to 50 years.
3. Two-layer polyethylene anti-corrosion layer
The two-layer polyethylene anti-corrosion layer is often called a jacket, referred to as 2LPE anti-corrosion layer, which has developed rapidly in China. Its bottom layer is hot melt adhesive, and the outer layer is coated with a layer of polyethylene by extrusion. The peeling strength of this anti-corrosion layer structure is low, but because its outer layer of polyethylene is a complete whole, it has good sealing and waterproof properties, and is an ideal anti-corrosion layer. The disadvantage is that the anti-cathode stripping performance is poor.

4. Three-layer polyethylene anti-corrosion layer
The three-layer polyethylene anti-corrosion layer, referred to as 3LPE anti-corrosion layer, has an epoxy anti-corrosion layer at the bottom layer, using fusion bonded epoxy powder (FBE) coating, a thermoplastic adhesive in the middle layer, usually ethylene, methacrylic acid, maleic acid or anhydride copolymer, with groups that react with epoxy resin and groups that are compatible with polyolefins, and has good adhesion to both the upper and lower layers, and the surface layer is high-density polyethylene. The three anti-corrosion layers are combined together, utilizing the advantages of different materials. The bottom epoxy powder utilizes its good adhesion, outstanding anti-cathodic stripping performance and certain anti-corrosion effect; the polar groups of the adhesive in the middle layer can react with the epoxy groups of the bottom epoxy powder to generate chemical bonds or hydrogen bonds. At the same time, its molecular structure is similar to that of polyethylene. According to the principle of like melts like, it can be integrated with the surface polyethylene to form a whole, achieving the required bonding strength; the surface polyethylene plays a role in mechanical protection and preventing the penetration of corrosive media, preventing the steel pipe from collision damage during transportation, and preventing corrosion of the steel pipe by water, air, acid, alkali, salt, weak electricity, etc. The three anti-corrosion layers are organically combined to form a composite anti-corrosion layer, which has the dual functions of excellent anti-corrosion and mechanical damage resistance.
5. Three-layer polypropylene anti-corrosion layer
The three-layer polypropylene anti-corrosion layer, referred to as 3LPP anti-corrosion layer, is based on the three-layer polyethylene anti-corrosion layer (3LPE) anti-corrosion layer structure. The difference between the two is that the surface layer of the anti-corrosion layer uses polypropylene (PP) instead of polyethylene (PE). Polypropylene has a neat structure, good chemical stability, excellent mechanical properties and high temperature resistance. The hardness, tensile strength, impact resistance and cathode stripping resistance of its anti-corrosion layer are better than those of polyethylene anti-corrosion layer. Because polypropylene and polyethylene have similar physical properties and extrusion processes, polypropylene anti-corrosionlayers can be produced on polyethylene anti-corrosion layer production lines.

info-400-400info-400-300

Send Inquiry