Feb 09, 2026 Leave a message

ASTM A671 CH115 Class 60 steel pipe

1. What is ASTM A671 CH115 Class 60?

A: It's an electric-fusion-welded (EFW) carbon steel pipe under ASTM A671, designed for low-temperature and high-pressure service.

CH115: Indicates the chemical composition (higher carbon/manganese than CG grades).

Class 60: Specifies a minimum yield strength of 60 ksi (414 MPa) and heat treatment (typically normalized or stress-relieved).


2. Key Applications?

A: Used in demanding environments requiring strength and low-temperature toughness, such as:

Oil & gas pipelines (arctic/cryogenic conditions).

Power plants (high-pressure steam lines).

Petrochemical refineries (sour service resistance).


3. Material Properties?

A: Critical specifications include:

Chemistry: Carbon ≤0.30%, Manganese ≤1.60%, with controlled impurities (e.g., sulfur ≤0.025%).

Mechanical: Yield ≥60 ksi, Tensile 75–100 ksi; Charpy V-notch impact tested (e.g., -50°F/-45°C).

Manufacturing: EFW with 100% radiography (RT) for weld integrity.


4. How does it compare to other A671 classes?

A: Key differences:

Higher strength than Class 22/32 (e.g., CH115 Class 60 vs. CG100 Class 22).

Tighter chemical control vs. lower grades (enhanced weldability and toughness).

Mandatory heat treatment (unlike non-heat-treated classes like Class 12).


5. Compliance & Standards?

A: Governed by:

ASTM A671/A671M: Base standard for EFW pipes.

ASME B31.3: Process piping design rules.

Supplementary Tests: Hydrostatic, UT (ultrasonic testing), and hardness tests.

info-300-300

Send Inquiry