1. What is ASTM A671 CC70 Class 43 Steel Pipe?
Answer:
ASTM A671 CC70 Class 43 is an electric-fusion-welded (EFW) carbon steel pipe designed for cryogenic service (down to -70°F/-57°C). Key specifications:
CC70: Material grade requiring Charpy V-notch impact testing at -70°F to ensure cryogenic toughness.
Class 43: Minimum yield strength of 43 ksi (296 MPa), optimized for high-pressure cryogenic systems (e.g., LNG liquefaction plants, high-pressure gas transmission).
2. What are the manufacturing and quality control standards?
Answer:
Welding Process: EFW with filler metal, 100% radiographic (RT) or ultrasonic (UT) inspection for weld integrity.
Heat Treatment: Stress-relieved or normalized to enhance low-temperature ductility.
Testing Requirements:
Mandatory Charpy impact tests at -70°F.
Hydrostatic pressure test at 1.5x design pressure.
Chemical composition verification (e.g., carbon ≤ 0.25%, manganese ≤ 1.30%).
3. How does Class 43 compare to other ASTM A671 classes?
Answer:
| Parameter | CC70 Class 43 | CC70 Class 22 | CC65 Class 72 |
|---|---|---|---|
| Yield Strength | 43 ksi (296 MPa) | 22 ksi (152 MPa) | 72 ksi (500 MPa) |
| Pressure Rating | High-pressure cryogenic | Low-pressure systems | Ultra-high-strength |
| Cost Efficiency | Mid-to-high range | Budget-friendly | Premium for extreme loads |
4. What are the standard dimensions and tolerances?
Answer:
Diameter Range: 16" to 120" OD (standard for large-scale cryogenic pipelines).
Wall Thickness: Tolerance of ±10% nominal thickness per ASTM A671.
Length: Standard 40ft (12.2m), with custom lengths up to 60ft available.
5. How to ensure corrosion protection and longevity?
Answer:
External Protection:
3LPE coating (3-layer polyethylene) for buried/submerged pipelines.
Cathodic protection in corrosive environments (e.g., coastal/industrial areas).
Internal Protection:
Epoxy/FBE linings for chemical and abrasion resistance (e.g., LNG with impurities).
Maintenance: Annual inspections of welds and coatings in cyclic pressure/temperature conditions.





