1. Q: What is "NPS" and "Schedule" in pipe sizing?
A: NPS (Nominal Pipe Size) is a dimensionless number roughly representing the pipe's diameter. Schedule (e.g., Sch 40, 80, 160) indicates the wall thickness; a higher schedule means a thicker wall at a given NPS.
2. Q: Why is ASTM A519 a relevant specification?
A: ASTM A519 covers seamless carbon and alloy steel mechanical tubing (not pressure pipe) used for machining parts, rollers, and structural components where precise mechanical properties are needed.
3. Q: What is the significance of "killed" carbon steel in piping?
A: Killed steel is fully deoxidized (with Al, Si), resulting in a more homogeneous structure with fewer gas voids, better for forging, heat treatment, and critical applications like A333 low-temperature pipe.
4. Q: What is the maximum allowable carbon content for most common wrought carbon steel piping grades?
A: Typically, carbon content is below 0.35% for good weldability and formability. For example, ASTM A106 Gr. B has a max of 0.30% C, while A53 Type S Gr. B has a max of 0.30% C.
5. Q: What is the difference between "Yield Strength" and "Tensile Strength" in pipe specifications?
A: Yield Strength is the stress at which permanent deformation begins. Tensile Strength is the maximum stress the material can withstand while being stretched. Both are minimum guaranteed values in specs like API 5L.





