Jul 31, 2025 Leave a message

ASTM A519 4130 Steel Pipe


1. Material Definition and Core Properties
Q: What is ASTM A519 4130 steel pipe?
A:
4130 steel pipe is a chromium-molybdenum alloy steel seamless pipe (UNS G41300) specified in the ASTM A519 standard. Its core composition is 0.28%-0.33% carbon, 0.80%-1.10% chromium, and 0.15%-0.25% molybdenum. Through the synergistic effect of chromium and molybdenum, this material combines high strength (tensile strength ≥ 560 MPa), excellent toughness (impact energy ≥ 27J at -40°C), and good weldability. It is a classic medium-carbon alloy steel for applications in aviation, energy, and other fields. It features a through-hardening depth of up to 50mm (oil quenching), and can be flexibly balanced between strength and toughness through heat treatment.

2. Mechanical Properties and Technical Parameters
Q: What are the performance specifications of 4130 steel pipe?
A:
Typical properties in the quenched and tempered state (850°C oil quenching + 540°C tempering) are: tensile strength ≥ 930 MPa, yield strength ≥ 785 MPa, and elongation ≥ 12%. Its fatigue strength (10⁷ cycles) reaches 50%-55% of the tensile strength, and its high-temperature performance is stable (strength retention ≥ 85% at 300°C). Special processes (such as austempering) can further improve fracture toughness (KIC ≥ 110 MPa·m¹/²), making it suitable for dynamic load applications.

3. Typical Application Scenarios
Q: What are the main applications of 4130 steel pipe?
A:

Aerospace: Landing gear links, engine mounts
Energy equipment: Nuclear power main pipeline supports and hangers, shale gas drill pipes
Racing: Roll cages, suspension links
Special equipment: High-pressure gas cylinders, rocket fuel tanks (must comply with AMS 6371)
4. Key Points for Heat Treatment and Processing
Q: How to optimize the heat treatment and processing of 4130 steel pipe?
A:
Recommended Process:

Welding: Use ER80S-D2 welding wire, preheat to 200-250°C, and immediately dehydrogenate at 620°C for 2 hours after welding.
Heat Treatment: Dual-phase quenching (780°C for 1 hour → oil quenching) + step tempering (350°C for 1 hour → 540°C for 2 hours).
Machining: Use TiAlN-coated tools, cutting speed 70-90 m/min.
Key Controls: Avoid dwelling in the temper brittleness zone of 250-400°C. Control the cooling rate for thick-walled parts. 5. Comparison with Similar Materials ****Q: What are the differences between 4130, 4140, and 4340 steel pipes?
A:

vs. 4140: 4130 has a lower carbon content (0.28%-0.33% vs. 0.38%-0.43%), resulting in better weldability but 15%-20% lower strength.
vs. 4340: 4130 contains no nickel, resulting in a 30% lower cost, but its low-temperature toughness (-60°C impact energy) is only 60% of that of 4340.

Impossible Substitution Scenarios: Not recommended as a replacement for 300M steel in landing gear main bearing components or for 17-4PH steel in corrosive environments.

info-306-305

Send Inquiry