Jul 31, 2025 Leave a message

ASTM A519 1030 Steel Pipe


1. What is ASTM A519 1030 Steel Pipe?
A: ASTM A519 is the American standard for seamless carbon and alloy steel pipe for mechanical applications. 1030 designates medium carbon steel with a carbon content of approximately 0.30%. This type of steel pipe is produced through cold drawing or hot rolling processes and offers high dimensional accuracy and mechanical properties. It is commonly used in mechanical structural components, hydraulic systems, and other applications.

2. What is the chemical composition of 1030 steel?
A: Typical composition range (weight percentage):

Carbon (C): 0.28–0.34%
Manganese (Mn): 0.60–0.90%
Phosphorus (P) ≤ 0.040%, Sulfur (S) ≤ 0.050%
Residual elements such as silicon (Si) may be present in trace amounts.
3. What are the mechanical property requirements for 1030 steel pipe?
Answer (using the cold-drawn state as an example):

Tensile strength: ≥515 MPa (75 ksi)
Yield strength: ≥400 MPa (58 ksi)
Elongation: ≥10% (gauge length 50mm).
(Hot-rolled properties are slightly lower; please refer to the specific standard table.)
4. What are the main application areas?
Answer:

Machinery manufacturing (shafts, gear blanks)
Hydraulic cylinders, automotive transmission components
General structural parts (where welding or machining is required).
5. What is the difference between AISI 1030 steel and ASTM A519 steel?
Answer: AISI 1030 is a material designation, while ASTM A519 is a steel pipe product standard. A519 1030 steel pipe must meet dimensional tolerances, processing, and testing requirements (such as non-destructive testing), while AISI 1030 only defines chemical composition and basic properties.

6. What are the surface treatment options? A:

Black surface (untreated after hot rolling)

Cold-drawn bright surface (smooth, scale-free)

Can be subsequently galvanized, phosphated, or oiled for rust protection.

info-400-275

Send Inquiry