1. ASTM A213 is a standard developed by the American Society for Testing and Materials (ASTM). Its full name is "Standard Specification for Seamless Ferritic and Austenitic Alloy Steel Boiler, Superheater and Heat Exchanger Tubes". There are multiple versions, such as ASTM A213/A213M-22, ASTM A213/A213M-21a, ASTM A213/A213M-21, etc.
2. Ferritic alloy steel is based on ferrite and has a body-centered cubic crystal structure. In the ASTM A213 standard, this type of steel has good thermal conductivity, low thermal expansion coefficient, certain oxidation resistance and corrosion resistance, can withstand certain high temperatures and pressures, and is often used in equipment such as boilers, superheaters and heat exchangers.
3. Austenitic alloy steel
Austenitic alloy steel is based on austenite and has a face-centered cubic crystal structure. In the ASTM A213 standard, it has excellent high-temperature strength, toughness and corrosion resistance, especially in high temperature, high pressure and corrosive environment, it can maintain good mechanical properties and chemical stability, and is also a common material for boilers, superheaters and heat exchangers.
4. Taking the ASTM A213 S30432 stainless steel seamless pipe for ultra-supercritical power plant boilers as an example, it belongs to the category of austenitic alloy steel, and the relevant situation is as follows:
Chemical composition
Select high-quality tube billets, optimize elements such as C, Ni, Cr, N, Nb and Cu, and strictly control the content of P and S to ensure the performance of the material.
Mechanical properties
Room temperature mechanical properties: tensile strength ≥590MPa, yield strength ≥235MPa, elongation ≥35%, which can meet the standard requirements.
High temperature mechanical properties: equivalent to imported pipes from abroad, can adapt to the needs of high parameters and harsh working environments such as superheaters and reheaters of ultra-supercritical power plant boilers2.
Grain size
Through the new process of high temperature softening + large deformation cold processing + solution heat treatment, the grain size of more than 7 levels is obtained, which is conducive to improving the high temperature steam corrosion resistance and high temperature durability of the steel pipe
5. Other properties
The material has high surface quality, good dimensional accuracy, good welding performance and other properties during use, reaching the advanced level of similar foreign products






