Jun 20, 2025 Leave a message

Application fields of thick-walled steel pipes

Q1: How to choose thick-walled steel pipes in the petrochemical industry?
The petrochemical industry selects materials according to working conditions: 20# steel (SCH80) for atmospheric and vacuum devices, 15CrMo (SCH160) for hydrogenation reactor outlet pipes, and 316L composite pipes for acidic environments. The design needs to consider: corrosion allowance (3-6mm), high temperature strength (allowable stress reduction), resistance to hydrogen damage (Nelson curve), etc. For example, the residual oil hydrogenation unit uses Φ426×45mm 1.25Cr-0.5Mo-Si steel pipes, with an operating pressure of 18MPa and a design life of 20 years. In recent years, the application of duplex steel thick-walled pipes (such as S31803) in harsh environments has increased significantly.

Q2: What are the technical requirements for thick-walled steel pipes for power plant boilers?
Supercritical boilers require SA-335 P91/P92 thick-walled tubes (Φ300×60mm), and their endurance strength (600℃/10^5h≥100MPa) is a key indicator. Grain size (ASTM 5-8), delta ferrite content (≤5%), and hardness (180-250HB) need to be controlled. The preheating temperature during installation is 200-250℃, and the post-weld heat treatment is 760±10℃. China's GB 5310 standard requires non-metallic inclusions in boiler tubes to be ≤1.5, which is stricter than ASME. In recent years, 700℃ ultra-supercritical units have begun to try out HR6W (Ni-based alloy) thick-walled tubes.

Q3: Special requirements for thick-walled steel pipes for offshore platforms?
Thick-walled pipes for offshore jackets (such as Φ2000×60mm) must meet the following requirements: -40℃ impact energy ≥100J, CTOD value ≥0.25mm, and lamellar tear resistance (Z35 grade). Microalloying design (Nb+V+Ti≤0.15%), carbon equivalent CEV≤0.43%. 300μm epoxy coating + sacrificial anode protection is required for corrosion protection. Special welding materials (such as E9018-G) are required for underwater welding during installation, and the risk of hydrogen-induced cracking is monitored. The Norwegian NORSOK M-120 standard has detailed provisions for this type of pipe.

Q4: Performance requirements for thick-walled hydraulic cylinder pipes for construction machinery?
Precision thick-walled pipes for hydraulic cylinders (such as 45# steel Φ200×30mm) require: dimensional accuracy H9 level, roundness ≤0.3mm/m, surface roughness Ra0.8μm. Tempering treatment (quenching + high temperature tempering) is required to hardness 220-260HB. The inner hole is rolled (residual compressive stress ≥-400MPa) to improve fatigue life. Under the trend of lightweight construction machinery, the application of ultra-high-strength steel thick-walled pipes (such as Q690) has increased, but the problem of cold bending cracking needs to be solved.

Q5: What are the key technologies for thick-walled stainless steel pipes for nuclear power?
The Z2CND18-12 (nitrogen-controlled 316L) thick-walled centrifugally cast pipes for nuclear power main pipelines require: qualified intergranular corrosion test (ASTM A262 E method), ferrite content 8-12FN, [Co] ≤ 0.05%. Electroslag remelting (ESR) is required to improve purity during manufacturing, and the ultrasonic flaw detection sensitivity is Φ1mm. The installation adopts narrow gap automatic welding (NG-GTAW), and the pickling and passivation treatment is performed after welding. The Φ900×80mm main pipelines for China's CAP1400 units have been domestically produced.

info-225-225info-243-208info-270-187

Send Inquiry