Jun 05, 2025 Leave a message

Application fields and market analysis


What is the trend of the proportion of spiral welded pipes in oil and gas pipelines?
In onshore oil and gas trunk lines, spiral welded pipes account for about 60%-70%, especially for pipes with a diameter of DN500 or above. Deep-sea pipelines need to withstand high external pressure, so straight seam welded pipes account for a higher proportion. Shale gas development drives the demand for high-grade spiral pipes such as X80. In the newly planned pipeline projects in the Middle East, the winning rate of spiral welded pipes exceeds 75%. It is expected that the global annual demand will exceed 25 million tons in 2025.

Special requirements for urban water supply and drainage pipelines?
Lining with cement mortar or epoxy coating is required to prevent water pollution. Low-cost materials such as Q235B can be used for low-pressure conditions. The interface design needs to be easy to connect quickly on site, and socket or flange types are commonly used. Earthquake-resistant areas require weld toughness to reach 40J or more. Some cities require sacrificial anode protection to be installed on the outer wall of the pipeline.

Technical challenges for pipes used in offshore wind power foundations?
Single pile foundation pipes need to meet the welding process assessment with a wall thickness of ≥80mm. Salt spray environment requires coating to be resistant to C5-M corrosion. Weld fatigue life under dynamic load needs to exceed 10^7 cycles. Installation needs to resist ship impact and seabed scouring. At present, China has successfully developed giant spiral welded pipes with a diameter of 8 meters and a weight of more than 2,000 tons.

Potential of emerging markets (such as hydrogen pipelines)?
Hydrogen transportation needs to solve the hydrogen embrittlement problem, and the material hardness needs to be controlled to ≤250HV10. The transformation of existing natural gas pipelines into hydrogen-blended pipelines requires re-evaluation of weld safety. Pure hydrogen pipelines may use X65 steel grade lining polymer solutions. Europe has launched the HyDelta project to study spiral welded pipe hydrogen transmission standards. It is estimated that global hydrogen pipeline investment will exceed US$30 billion in 2030.

Impact of environmental protection policies on the industry?
Carbon tax policies have prompted steel mills to develop low-carbon emission pipeline steel (such as H2Pro® steel). VOCs control requires coating production lines to be equipped with exhaust gas treatment devices. Water resource management regulations promote the application of dry non-destructive testing technology. The EU Carbon Border Tax (CBAM) increases export costs by about 8%-12%. Leading companies have begun to deploy a photovoltaic + electric arc furnace zero-carbon steel pipe production model.

steelpipetube

Send Inquiry