Aug 08, 2025 Leave a message

API 6D standard

1. Q: What is the API 6D standard?
A: API 6D is the American Petroleum Institute's specification for pipeline valves, known as "Valves for Pipeline Transportation Systems." This standard specifically addresses valves used in the oil, gas, and pipeline industries, including ball valves, gate valves, plug valves, and check valves. The 25th edition (as of August 2025) specifically strengthens technical requirements for low-emission valves and digital interface specifications. Additional note: Unlike API 6A (for wellhead equipment), 6D focuses more on valves used in long-distance pipeline systems, applicable to onshore and subsea pipelines, and storage and transportation facilities.
2. Q: What valve types does the API 6D standard apply to?
A: It primarily covers the following valve types: • Full-bore valves: such as fully welded ball valves and split-body ball valves; • Block valves: gate valves and plug valves; • Control valves: check valves (including double-plate and swing types); • Specially designed valves: such as ball valves with relief functions and cryogenic valves (below -196°C). Key limitation: It does not apply to regulating valves, safety valves, or wellhead valves (the latter fall under API 6A).
3. Q: What are the core requirements for valve testing in API 6D?
A: Key tests specified in the standard include: Pressure testing: shell strength test (1.5 times rated pressure) and seal test (1.1 times rated pressure); Operational testing: opening and closing torque test and cycle life test (typically requiring no leakage for more than 500 cycles); Fire safety testing: Fire safety design verification in accordance with API 607/6FA; Cryogenic testing: Valves used with cryogenic media such as LNG must undergo a -196°C impact test. Special requirement: All testing must be performed by an API-approved third-party laboratory.
4. Q: How do I distinguish the pressure ratings of API 6D valves?
A: API 6D valve pressure ratings are indicated by Class. Common ratings include: • Class 150 to 2500: corresponding to different pound classes (e.g., Class 150 = 20 bar, Class 600 = 100 bar); • Special ratings: such as Class 3000 (500 bar) and Class 4500 (750 bar), used for ultra-high-pressure pipelines. Note: When selecting a valve, consider the effect of temperature on the pressure rating (refer to the ASME B16.34 temperature-pressure curve).
5. Q: What is the relationship between API 6D and ISO 14313?
A: The technical content of the two standards is essentially the same, but there are the following differences: • Standard system: API 6D is an American standard, while ISO 14313 is an international standard; • Additional requirements: API 6D includes more detailed material traceability and NDE (non-destructive examination) requirements; • Certification mark: API 6D valves can be marked with the API monogram, while ISO 14313 does not have a dedicated certification mark. Practical application: Most manufacturers comply with both standards, but exports to the American market generally prioritize API 6D.

info-400-229

Send Inquiry