

Technical Specification: API 5CT V80-Q API Tubing
1. Core Specification & Product Type
| Specification | Description |
|---|---|
| Governing Standard | API Specification 5CT - Casing and Tubing |
| Product Type | Tubing - The innermost string of pipe in a completed well, used to convey produced fluids to the surface. |
| Designation | V80-Q - The "V" indicates a yield strength of 80,000 psi, and "-Q" designates the Quenched & Tempered heat treatment condition. |
2. Material Grade & Mechanical Properties (Typical Minimums)
The grade "V80" defines the minimum mechanical performance. The "-Q" suffix is critical as it specifies the manufacturing process.
| Property | Requirement / Value | Notes |
|---|---|---|
| Minimum Yield Strength | 80,000 psi (552 MPa) | This is the stress at which permanent deformation begins. |
| Minimum Tensile Strength | 95,000 psi (655 MPa) | The maximum stress the material can withstand. |
| Yield-to-Tensile Ratio | ≤ 0.85 | A lower ratio indicates better deformability and resistance to downhole burst/collapse failures. |
| Hardness | Typically ≤ HRC 23 (for V80-Q) | Controlled to mitigate risks of Sulfide Stress Cracking (SSC). V80-Q has a maximum hardness limit. |
| Elongation | As per API 5CT formulas | Varies with wall thickness and grade. |
3. Heat Treatment: Quenched & Tempered (Q&T)
The "-Q" suffix is the most important differentiator:
Process: The pipe is heated to a high temperature (austenitizing), rapidly cooled (quenched in water or polymer), and then reheated to a lower temperature (tempered).
Benefits: This process creates a fine, uniform microstructure (tempered martensite/bainite), resulting in an excellent balance of strength, toughness, and uniformity throughout the pipe wall.
Comparison: Q&T pipe generally has better mechanical properties and more consistent performance than normalized pipe of the same grade.
4. Chemical Composition (Typical Ranges)
Chemical composition is controlled to achieve the required mechanical properties and weldability.
| Element | Typical Range (%) | Purpose / Effect |
|---|---|---|
| Carbon (C) | 0.20 - 0.35 | Primary strengthening element. |
| Manganese (Mn) | 1.00 - 1.50 | Increases strength and hardenability. |
| Silicon (Si) | 0.15 - 0.35 | Deoxidizer, strengthens ferrite. |
| Phosphorus (P) | ≤ 0.020 | Impurity; kept low for toughness. |
| Sulfur (S) | ≤ 0.010 | Impurity; kept very low for improved ductility and SSC resistance. |
| Others (Cr, Mo, Ni, etc.) | Trace amounts | May be added for specific properties like hardenability. |
5. Application & Key Considerations
| Aspect | Details |
|---|---|
| Primary Applications | • Production tubing in standard oil/gas wells • Water or gas injection tubing • Workover and completion strings • Wells requiring medium strength (80 ksi yield). |
| Sour Service (H₂S) Suitability | Conditionally Suitable. V80-Q with a maximum hardness of HRC 23 can be used for mild sour service as defined by NACE MR0175/ISO 15156. Final suitability requires project-specific qualification and may mandate additional testing (e.g., SSC testing). It is not inherently an "SSC-resistant" grade like L80 or C110. |
| Key Advantages | • Good strength-to-toughness ratio due to Q&T process. • More uniform properties than normalized grades. • Widely available and cost-effective for many applications. |
| Typical Ordering Info Needed | • Size: e.g., 2-7/8", 3-1/2" OD • Wall Thickness / Weight: e.g., 6.50 lb/ft, 9.20 lb/ft • End Connection: e.g., API EUE (External Upset End), or premium threads (VAM, HYDRIL, etc.) • Length Range: e.g., Range 2 (~20-24 ft), Range 3 (~38-42 ft) |
6. Quick Comparison: V80-Q vs. Similar Grades
| Feature | API 5CT V80-Q | API 5CT N80-1/Q | API 5CT L80-1 |
|---|---|---|---|
| Yield Strength (min) | 80,000 psi | 80,000 psi | 80,000 psi |
| Heat Treatment | Quenched & Tempered | Quenched & Tempered | Quenched & Tempered |
| Max Hardness | HRC 23 (typical) | HRC 23 | HRC 23 |
| Primary Distinction | Often considered a "value" or standard Q&T 80-ksi grade. | The most common and traditional Q&T 80-ksi grade. | Specifically designed and tested for sour service (H₂S). |
| Sour Service | May be used if hardness ≤ HRC 23 is verified. | May be used if hardness ≤ HRC 23 is verified. | Yes, the chemistry and process are optimized for sour service. |
Summary: API 5CT V80-Q Tubing is a quenched and tempered, medium-strength downhole pipe offering reliable performance for general oilfield applications. Its defining characteristic is the Q&T process, which provides consistent mechanical properties. While it can be used in mild sour environments with proper hardness control, it is not specifically engineered for severe corrosive service like some other grades.





