Sep 17, 2025 Leave a message

ASTM A691 LSAW Pipe: Alloy Steel Grades, Heat Treatment, and High-Temperature Uses

What Is ASTM A691 Pipe?

ASTM A691 is the standard specification for carbon and alloy steel pipe, electric-fusion-welded for high-pressure service at high temperatures. The pipe is formed from pressure-vessel-quality plate, welded longitudinally by electric fusion welding, and then heat treated so that the weld zone and the base metal achieve the required properties. It is the welded counterpart of seamless alloy pipe such as ASTM A335, and it is selected for large-diameter, high-temperature, high-pressure lines where seamless pipe is not available or economical.

Grade Designations

The grade name states the steel chemistry and the minimum tensile strength in ksi. The prefix identifies the plate steel family, and the number is the strength level.

Grade Material Minimum Tensile Strength
CM-65 Carbon-molybdenum steel 65 ksi, equal to 448 MPa
CM-70 Carbon-molybdenum steel 70 ksi, equal to 483 MPa
CM-75 Carbon-molybdenum steel 75 ksi, equal to 517 MPa
1-1/4Cr Chromium-molybdenum steel Per the specified strength level
2-1/4Cr Chromium-molybdenum steel Per the specified strength level
5Cr Chromium-molybdenum steel Per the specified strength level

The chromium-molybdenum grades are used where resistance to creep, oxidation, and hydrogen attack is required at elevated temperatures, matching the compositions of A335 P11, P22, and P5-type steels.

Class System

The class number defines the heat treatment and testing applied to the finished pipe after welding. Class 10 requires no post-weld heat treatment, Class 11 requires stress relief, Class 12 requires normalizing, Class 13 requires normalizing and tempering, and Class 14 requires quenching and tempering. Higher class numbers add non-destructive examination and testing requirements. The class is selected according to the service temperature, pressure, and the requirements of the design code.

Manufacturing Process

The plate is formed into a cylinder, and the longitudinal seam is closed by submerged arc welding or another electric fusion process with filler metal added. After welding, the pipe is heat treated according to the specified class, which restores the toughness of the heat-affected zone and develops the required mechanical properties. The weld is examined by radiography or ultrasonic testing, and each pipe is hydrostatically tested before shipment.

Testing and Certification

Every lot is verified by tensile testing, and impact testing is required for low-temperature or critical service. Non-destructive examination of the weld is mandatory, and the examination level follows the class. Mill test reports document the chemistry, mechanical properties, heat treatment details, and test results, providing the complete quality record required for high-pressure piping systems.

Typical Applications

A691 pipe is used in power generation for main steam lines, hot reheat lines, and boiler external piping, and in hydrocarbon processing for high-temperature process lines in refineries and petrochemical plants. It is the specification of choice for large-diameter, high-temperature lines where A672 pipe, which is limited to lower-temperature carbon steel service, is not suitable. The heat-treated alloy construction gives it the creep strength the service demands.

FAQ

What is the difference between A691 and A672 pipe?

A672 covers electric-fusion-welded carbon steel pipe for moderate-pressure service, while A691 covers heat-treated alloy steel pipe for high-pressure, high-temperature service. A691 grades include chromium-molybdenum steels and require mandatory heat treatment.

Why is heat treatment mandatory for A691?

Welding reduces the toughness of the heat-affected zone. Heat treatment restores the mechanical properties of the weld area and develops the creep strength required for high-temperature service.

What class should be specified?

The class is selected per the design code and service. Classes 11 through 14 add increasing levels of heat treatment, and the class with mandatory examination is used for critical high-pressure service.

Can A691 pipe replace seamless A335?

Where the design code permits welded construction and the diameter is large, A691 is the economical alternative to A335. The design must use the appropriate joint efficiency factor for the welded seam.

What sizes are available?

A691 pipe is produced in large diameters, typically from about 400 mm to more than 1500 mm, with wall thicknesses from about 6 mm to 75 mm. Lengths are typically 6 m to 12 m.

What certificates are provided?

Mill test reports document the chemistry, tensile and impact properties, heat treatment, non-destructive examination, and hydrostatic test results of each lot.

Send Inquiry