1. Material Definition and Standard Specifications
A38108 is a nickel-chromium-molybdenum corrosion-resistant alloy steel pipe (corresponding to the US grade Incoloy 825). Its core features include:
Composition Design:
Nickel-chromium-molybdenum-copper composite base (Ni ≥ 38%, Cr 19.5-23.5%, Mo 2.5-3.5%, Cu 1.5-3.0%);
Titanium Stabilization (Ti ≥ 5 × C%, typically 0.60-1.20%), Ultra-low Carbon (C ≤ 0.05%);
Implementation Standards: ASTM B423 (American Standard), GB/T 15062 (Chinese Standard), NACE MR0175 (Acidic Environment Certification). 2. Core Performance Advantages
Extreme Corrosion Resistance:
Resistant to sulfuric acid, phosphoric acid, and mixed acid corrosion (50% sulfuric acid + 0.1% HF, corrosion rate <0.1 mm/year);
Stress Corrosion Cracking (SCC) resistance 10 times that of 316L;
High-Temperature Performance: Continuous operating temperature 600°C, short-term resistance 800°C;
Process Characteristics: Requires ERNiCrMo-3 welding wire, post-weld pickling and passivation.
3. Typical Applications
Offshore Engineering:
Deep-sea Christmas tree valve components;
High-pressure piping in seawater desalination plants;
Chemical Equipment:
Hydrometallurgical reactors;
Heat exchange tubes in sulfuric acid regeneration systems;
Special Applications: Linings for nuclear waste disposal vessels. 4. Comparison with Similar Materials
vs. A31254 (254SMO):
Higher nickel content, greater resistance to reducing acids;
Lower molybdenum content, 25% lower cost;
vs. N08825 (Incoloy 825):
Compared to N08825 (Incoloy 825):
Compared to N08825 (Incoloy 825), the material has stricter purity control.
5. Procurement and Processing Key Points
Key Tests:
Intergranular corrosion test (ASTM G28 Method A);
Ferrite content ≤ 1% (to prevent sigma phase precipitation)






