1. What is 20MoG steel pipe?
20MoG is a molybdenum alloy seamless boiler steel pipe that conforms to the Chinese standard GB/T 5310 and is classified as a low-alloy, heat-resistant steel. Its name means:
"20": Average carbon content of approximately 0.17%-0.24% (slightly higher than 15MoG, resulting in improved strength);
"Mo": 0.40%-0.55% molybdenum is added to enhance high-temperature creep resistance;
"G": Boiler-specific (the initials of the Chinese pinyin for "guo").
It is primarily used in superheaters and steam piping in high-pressure power plant boilers. It operates in temperatures of 450°C-580°C, offering higher temperature resistance than 15MoG.
2. What are the core performance advantages of 20MoG?
High-Temperature Strength: Tensile strength ≥420 MPa at 550°C, superior to ordinary carbon steel (such as 20G);
Creep Resistance: Molybdenum inhibits carbide aggregation, making it less susceptible to deformation during long-term high-temperature service;
Weldability: Preheating to 180°C-250°C is required, and post-weld heat treatment (such as tempering) is required to reduce residual stress.
3. What are the main differences between 20MoG and 15MoG?
Carbon Content: 20MoG has a higher carbon content (0.17%-0.24% vs. 15MoG's 0.12%-0.18%), resulting in higher strength but slightly lower weldability;
Applicable Temperature: 20MoG has a maximum temperature resistance of 580°C, while 15MoG is suitable for temperatures below 550°C;
Cost Difference: Due to their similar composition, the two are priced similarly, but 20MoG is more commonly used in higher-parameter units.
4. What are the typical applications of 20MoG? Power Industry: High-temperature superheaters and main steam piping for ultra-high-pressure boilers;
Petrochemical Industry: High-temperature cracking units and hydrogenation reactor piping;
Special Requirements: Components subject to frequent thermal cycling (due to its excellent thermal fatigue resistance).
5. What should I consider when purchasing 20MoG?
Material Certification: Verify the GB/T 5310-2017 quality certificate to ensure that the molybdenum content meets the standard.
Testing Requirements: Ultrasonic flaw detection (UT) and high-temperature tensile testing are recommended.
Alternative: If the temperature is below 450°C, 15MoG may be considered to reduce costs.






