


Overview
15CrMoG is a chromium-molybdenum (Cr-Mo) alloy steel specifically designed for high-temperature service. The "G" in its designation (according to Chinese standards like GB 5310) stands for "Gang" (钢), meaning it is a seamless steel pipe for high-pressure boilers.
It is a heat-resistant steel that maintains good strength and resistance to oxidation (scaling) at elevated temperatures, typically in the range of 400°C to 550°C.
Chemical Composition (Typical %)
The composition is the foundation of its properties. Key elements include:
| Element | Content (%) | Function |
|---|---|---|
| Carbon (C) | 0.12 - 0.18 | Provides basic strength and hardness. |
| Chromium (Cr) | 0.80 - 1.10 | Enhances corrosion & oxidation resistance; improves high-temperature strength. |
| Molybdenum (Mo) | 0.45 - 0.65 | Significantly increases strength at high temperatures and improves creep resistance. |
| Manganese (Mn) | 0.40 - 0.70 | Improves hardenability and strength. |
| Silicon (Si) | 0.17 - 0.37 | Deoxidizer during steelmaking, increases strength. |
| Phosphorus (P) | ≤ 0.025 | Impurity, kept low to prevent brittleness. |
| Sulfur (S) | ≤ 0.025 | Impurity, kept low to improve ductility and weldability. |
Note: Exact limits may vary slightly depending on the manufacturing standard (e.g., GB 5310, ASTM A335).
Mechanical Properties
The properties are developed through heat treatment (normalizing and tempering).
| Property | Value (After Heat Treatment) |
|---|---|
| Tensile Strength (Rm) | ≥ 440 MPa |
| Yield Strength (Rp0.2) | ≥ 295 MPa |
| Elongation (A) | ≥ 22% |
| Impact Energy (AKV) | ≥ 34 J |
Key Characteristics & Advantages
Excellent High-Temperature Strength: Retains its mechanical strength much better than carbon steel when exposed to prolonged high temperatures.
Good Creep Resistance: Resists the tendency to slowly and permanently deform under constant mechanical stress at high temperatures. This is critical for boiler tubes.
Good Oxidation Resistance: The chromium content forms a stable, protective oxide layer (Cr₂O₃) on the surface, preventing excessive scaling.
Good Thermal Fatigue Resistance: Can withstand cyclic heating and cooling.
Good Weldability: It is readily weldable, but requires pre-heating and post-weld heat treatment (PWHT) to control the hardening of the Heat-Affected Zone (HAZ) and relieve stresses.
Main Applications
15CrMoG pipes are primarily used in the power generation and petrochemical industries for high-temperature, high-pressure applications:
High-Pressure Boiler Tubes: Superheater tubes, reheater tubes, evaporator tubes, and high-temperature headers in fossil fuel power plants.
Heat Exchanger Tubes: In petroleum refineries and chemical plants where processes involve high temperatures.
Seamless Steel Pipes for Pressure Purposes: Used in various pressure vessels and piping systems operating at elevated temperatures.
Relevant Standards
Chinese Standard (GB): GB 5310 - "Seamless steel tubes for high pressure boiler"
This is the primary standard specifying the requirements for 15CrMoG.
International Equivalents:
ASTM A335 P12 - The American standard grade is very similar in composition and application.
DIN 17175 13CrMo44 - The German equivalent.
EN 10216-2 13CrMo4-5 - The European standard equivalent.
While the compositions are very close, they are not always identical. Direct substitution requires careful review of the specific design codes and standards.
Manufacturing and Heat Treatment
Seamless 15CrMoG pipes are manufactured through processes like hot extrusion or rotary piercing. The final pipes are always supplied in the heat-treated condition (normalized and tempered) to achieve the required microstructure (typically a tempered bainite or ferrite/pearlite structure) and mechanical properties.
Welding Considerations
Welding 15CrMoG is common but requires strict procedures:
Pre-heating: Essential to prevent hydrogen-induced cold cracking. Typical pre-heat temperature is 150-200°C.
Filler Metal: Must use matching or over-matching alloy electrodes/wires (e.g., E/R-XXX type).
Post-Weld Heat Treatment (PWHT): Mandatory to temper the hard martensitic structure in the weld and HAZ, restore toughness, and relieve residual stresses. A typical PWHT temperature is around 680-720°C.
Comparison with Other Grades
vs. 20G (Carbon Steel): 20G is a carbon steel boiler tube used for lower temperature sections (e.g., water walls). 15CrMoG, with its Cr-Mo content, is superior for high-temperature sections like superheaters.
vs. 12Cr1MoVG: This grade has higher Chromium and Vanadium content, offering even better high-temperature strength and creep resistance than 15CrMoG, used for more demanding applications.
Summary
15CrMoG Seamless Steel Pipe is a critical material in high-temperature engineering. Its balanced composition of chromium and molybdenum provides an excellent combination of high-temperature strength, creep resistance, and weldability, making it a reliable and cost-effective choice for boiler and pressure piping systems in power and process industries.





