Oct 22, 2025 Leave a message

15CrMoG Alloy Steel Pipe: Properties, Heat Treatment and Boiler Applications

Product Definition and Key Characteristics

15CrMoG is a low-alloy pearlitic heat-resistant steel pipe designed for high-temperature, high-pressure service in power generation and petrochemical plants. The grade is standardised in GB 5310, which covers seamless steel tubes for high-pressure boilers, and its international counterpart is the 1Cr-0.5Mo class supplied as P12 pipe under ASTM A335 and as T12 tube under ASTM A213. The designation describes the material: a nominal carbon content of about 0.15 percent, chromium and molybdenum as the main alloying elements, and the letter G for boiler-grade quality. Chromium and molybdenum give the steel its creep resistance, oxidation resistance and resistance to hydrogen attack, while the controlled carbon level keeps it weldable and formable. It is a mature material with a long record of safe service in boiler plants, and it remains the standard choice for the medium-temperature sections of a steam generator.

Chemical Composition

Element Range per GB 5310 Function
Carbon, C 0.12 - 0.18 percent Strength and hardenability
Silicon, Si 0.17 - 0.37 percent Deoxidation
Manganese, Mn 0.40 - 0.70 percent Deoxidation, toughness
Chromium, Cr 0.80 - 1.10 percent Oxidation resistance, carbide formation
Molybdenum, Mo 0.40 - 0.55 percent High-temperature strength, creep resistance
Phosphorus, P 0.025 percent maximum Residual element, controlled
Sulfur, S 0.010 percent maximum Residual element, controlled

Mechanical Properties

Property Requirement
Minimum yield strength 295 MPa
Tensile strength 440 - 640 MPa
Minimum elongation 22 percent
Minimum impact energy 34 J at 20 degrees Celsius

These figures are the room-temperature acceptance values. The property that governs real design is creep strength at the metal temperature of the component, and the grade is normally applied up to about 550 degrees Celsius, with some designs extending to 580 degrees Celsius where the stress level allows.

Heat Treatment and Delivery Condition

15CrMoG pipe is delivered in the normalised and tempered condition. Normalising refines the grain structure, and tempering produces a stable pearlitic-bainitic microstructure with the required combination of strength and creep resistance. This heat treatment is essential rather than optional: the grade achieves its long-term high-temperature performance only when the microstructure is correct, so the normalising and tempering parameters should be verified on the mill certificate together with the tensile and impact results. Suppliers should be able to show a heat number that links the finished pipe to the original cast analysis.

Welding and Fabrication

The steel is weldable by shielded metal arc, gas tungsten arc, gas metal arc and submerged arc processes. Preheat of about 150 to 250 degrees Celsius is recommended for thicker sections, and post-weld heat treatment is normally required for boiler pressure parts. Welding consumables should match the chromium-molybdenum composition, joints must be clean and free of moisture, and the welding procedure should be qualified in accordance with the applicable boiler or pressure vessel code. Machining and bending are straightforward in the normalised and tempered condition, and cold bending of tube should be followed by a stress relief treatment where the forming strain is significant.

Primary Applications

15CrMoG pipes are fundamental components in the energy and power generation sectors. Main applications include superheater coils that heat saturated steam, reheater coils, water wall panels, headers and steam pipelines in high-pressure boiler systems. The petrochemical industry uses the grade in heat exchangers, reformer furnaces and pressure vessels operating at elevated temperature, and general industry uses it for piping systems that carry hot gases or fluids. In all of these duties the material is chosen because it delivers a substantial performance upgrade over carbon steel without the cost and fabrication complexity of higher-alloy grades.

Key Advantages and Selection Guidance

The widespread adoption of 15CrMoG is explained by its proven reliability, cost-effectiveness and balanced performance. Compared with higher-alloy steels such as 9 percent chromium grades, it offers a favourable balance between performance and cost for medium-temperature applications. It welds and forms more easily than high-chromium grades, and its resistance to hydrogen attack makes it a reliable choice for petrochemical service in hydrotreating units. When specifying the grade, state the governing standard, the manufacturing route, the dimensions as outside diameter and wall thickness, the length basis and the inspection requirements. For pressure service the pipe is seamless, supplied with a mill test certificate to EN 10204 3.1 and, where required, ultrasonic examination of the body.

FAQ

Q: What does 15CrMoG mean?
The designation describes the composition and quality: about 0.15 percent carbon, chromium and molybdenum as the alloying elements, and G for boiler-grade quality under GB 5310.

Q: What temperature can 15CrMoG withstand?
The grade is designed for metal temperatures up to about 550 degrees Celsius in continuous service, with some designs extending to 580 degrees Celsius at lower stress.

Q: What is the ASTM equivalent?
It corresponds to the 1Cr-0.5Mo class, supplied as P12 pipe under ASTM A335 and as T12 tube under ASTM A213.

Q: Is post-weld heat treatment required?
For boiler pressure parts, post-weld heat treatment is normally required. The temperature and holding time come from the applicable code and the qualified procedure.

Q: Why is the sulfur limit important?
A low sulfur limit reduces inclusion content and protects toughness, particularly in the heat-affected zone of welds in thick sections.

Q: How is the pipe delivered?
In the normalised and tempered condition, in random or fixed lengths, each length marked with the standard, grade, size and heat number for traceability.

Send Inquiry