

1. The Number: 1.5662
This is a material number (Werkstoffnummer). It's a precise, numerical code used primarily in Germany and Europe to identify a specific steel or alloy composition.
1.xxxx: The "1" at the beginning typically indicates it's a steel.
5662: This unique sequence points to the exact chemical composition and properties.
2. The Common Name: 13CrMo4-5
The material number 1.5662 is equivalent to the more commonly used name 13CrMo4-5 (according to EN 10216-2).
Let's break down this name:
13: Approximate percentage of Chromium (Cr) is 0.13% (It's actually ~1%, the naming is historical).
CrMo: The two main alloying elements are Chromium and Molybdenum.
4-5: The "4" refers to the Molybdenum content (~0.4%) and the "5" denotes a specific quality level or variant.
3. Chemical Composition (Typical)
| Element | Percentage |
|---|---|
| Carbon (C) | 0.08 - 0.18 % |
| Silicon (Si) | max. 0.35 % |
| Manganese (Mn) | 0.40 - 1.00 % |
| Phosphorus (P) | max. 0.025 % |
| Sulfur (S) | max. 0.020 % |
| Chromium (Cr) | 0.70 - 1.15 % |
| Molybdenum (Mo) | 0.40 - 0.60 % |
4. Key Properties
This combination of elements gives 1.5662 steel its characteristic properties:
Good High-Temperature Strength: It retains its mechanical strength and resists "creep" (slow deformation under constant stress) at elevated temperatures.
Improved Oxidation Resistance: The chromium content forms a protective oxide layer, reducing scaling at high temperatures.
Good Weldability: It can be welded using common methods, though pre-heating and post-weld heat treatment are often recommended to prevent cracking and restore the material's microstructure.
Toughness and Durability: It offers a good balance of strength and ductility.
5. Main Applications
Due to its properties, 1.5662 seamless pipes are predominantly used in high-temperature and high-pressure environments. Common applications include:
Power Generation: Boiler tubes, superheater tubes, and high-pressure steam lines in fossil fuel power plants.
Petrochemical Industry: Transfer lines, heat exchanger tubes, and piping in refineries and chemical plants.
Pressure Vessels: For containing gases or liquids at high pressures and temperatures.
6. Relevant Standards
Seamless pipes made of 1.5662 are governed by specific dimensional and technical delivery standards. The most important one is:
EN 10216-2: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties.
Other equivalent or similar standards from different regions include:
DIN 17175: A older German standard for seamless tubes for elevated temperatures.
ASTM A335 P11: This is a very close American equivalent. If you see P11 pipe, it is largely interchangeable with 1.5662/13CrMo4-5.
Summary
A 1.5662 Seamless Steel Pipe is a chromium-molybdenum alloy steel tube manufactured without a welded seam. It is specifically designed for use in high-temperature and high-pressure service, offering excellent strength, creep resistance, and durability. When sourcing or specifying this pipe, you will most often see it called 13CrMo4-5 and it will be supplied according to standard EN 10216-2.
Important Note: For critical applications, always consult the specific material certificate and the relevant engineering standards to ensure the pipe meets the exact requirements for your project.





