ASTM A179 Fin Tubes
High finned tubes are also called extruded tubes. The finning is achieved by extruding the fin from the tube.
This method of construction is very different from cutting grooves onto the tube as is often done by people who are on the lookout for a shortcut or who don't know any better.
General requirements
Tube material according to ASME II-A, last edition. Fin material according to ASME II-B, last edition.
Certification according to EN 10204 3.1 [2004] is required.
Tubes according to ASME-II SA 450.
Seamless tube only. Tube surface shall be free from repair welds, imperfections, scale or rust. A light rust protection product may be acceptable. No weld repair is permitted.
Material shall be adequately protected to ensure no damage of fins and tubes during shipping and handling.
Tubes shall be cut square and deburred both I.D. and O.D.
Tubes with zinc separator protected when package.
ASME SA179 L-Type Finned Tube
ASME SA179 L-Type finned tubes are widely used in heat exchangers for various industrial applications. These finned tubes are designed to enhance heat transfer efficiency by increasing the surface area of the tubes.
Hot Tags: astm a179 fin tubes, China astm a179 fin tubes manufacturers, suppliers, finned tube for heating water systems, finned tube for chemical reactors, finned tube in automotive industry, finned tube dimensions, finned tube for process cooling, finned tube in metallurgical industry
You Might Also Like
Send Inquiry














