X42 Straight Seam Carbon Welded Pipe
video

X42 Straight Seam Carbon Welded Pipe

An x42 straight seam carbon welded pipe is an API 5L line pipe at the X42/L290 level joined by a longitudinal weld. Supplied as an x42 lsaw pipe at large diameters or an api 5l x42 straight seam pipe by ERW at smaller ones, it is made from controlled carbon steel and inspected along the straight joint. X42 provides a 290 MPa minimum yield for moderate-pressure duty.
Send Inquiry
Chat Now
Product Introduction

X42 Straight Seam Carbon Welded Pipe

An x42 straight seam carbon welded pipe is an API 5L line pipe at the X42/L290 level joined by a longitudinal weld. Supplied as an x42 lsaw pipe at large diameters or an api 5l x42 straight seam pipe by ERW at smaller ones, it is made from controlled carbon steel and inspected along the straight joint. X42 provides a 290 MPa minimum yield for moderate-pressure duty.

StandardAPI 5L / ISO 3183
GradeX42 / L290
SeamLongitudinal
RouteERW or LSAW
LevelsPSL1 / PSL2
Yield, min290 MPa (42 ksi)
OD range~60–1420 mm
DocumentsEN 10204 3.1 / 3.2 + NDT
X42 straight seam orders need the weld route and the NDE level fixed early - they decide roundness, size range and the inspection package. Tell us the diameter, wall, grade and PSL and we will quote a checked pipe with MTC and seam reports. Request a quotation.

Product Overview: X42 Straight Seam Carbon Pipe

An X42 straight seam carbon welded pipe is a line pipe at the X42/L290 strength level with a longitudinal weld made by ERW or submerged-arc welding. The straight joint is short and easy to inspect and gives good diameter control, making this form a common choice for moderate-pressure oil, gas and water lines.

Grade and Standard Designation

X42 is the API 5L grade with a minimum yield of 42,000 psi (290 MPa), called L290 under ISO 3183. Straight seam means a single longitudinal weld parallel to the axis, produced by ERW at smaller diameters and by LSAW at larger ones.

Specification Levels and Delivery

PSL1 sets base chemistry, minimum strength, dimensions and a hydrostatic test. PSL2 adds a maximum strength band, a yield-to-tensile cap of 0.93, tighter phosphorus and sulfur, carbon-equivalent control, impact testing and seam NDE.

Chemical Composition

Values are indicative maximum mass percentages for X42 (L290) straight seam pipe. Low carbon and controlled manganese keep both ERW strip and LSAW plate weldable in the field.

Chemical limits for X42 (L290), wt% - indicative API 5L values
Element PSL1 max PSL2 max Role
Carbon (C) 0.26 0.22 Base hardenability; capped for field weldability
Manganese (Mn) 1.30 1.30 Principal solid-solution strengthening element
Phosphorus (P) 0.030 0.025 Restricted more tightly at PSL2
Sulfur (S) 0.030 0.015 Inclusion control; tighter at PSL2
Silicon (Si) Not specified 0.45 Deoxidising addition
Nb + V + Ti ≤ 0.15 ≤ 0.15 Micro-alloy grain refinement
Carbon equivalent (CE) Not required ≤ 0.40 Limits heat-affected-zone hardening

Mechanical Properties

Strength figures give the API 5L baseline for X42 straight seam product; PSL2 requires the pipe to sit within a strength band and to pass the specified impact test.

Mechanical property band for X42 (L290) - indicative API 5L values
Property PSL1 PSL2
Yield strength (Rt0.5) min 290 MPa 290–440 MPa
Tensile strength (Rm) min 415 MPa 415–620 MPa
Yield / tensile ratio Not specified ≤ 0.93
Elongation Per API 5L formula Per API 5L formula
Charpy V-notch Not required Required at project temperature

Dimensions and Weight

X42 straight seam pipe is made by ERW at small-to-medium OD and by LSAW at large OD; the table shows representative LSAW sizes. Plain-end theoretical mass uses 0.0246615 × (OD − WT) × WT kg/m and is indicative only; ordered tolerances change actual mass.

Indicative X42 size options and theoretical mass
Outside diameter (mm) Wall thickness (mm) Mass (kg/m) Route / note
323.9 10.0 77.41 LSAW
406.4 12.0 116.73 LSAW
508.0 14.0 170.61 LSAW
610.0 16.0 234.37 LSAW
711.0 18.0 307.98 LSAW
813.0 20.0 391.12 LSAW

Dimensional Tolerances

Tolerance limits follow API 5L and the purchase specification. The figures below are common indicative values; the applicable standard edition and the project data sheet govern acceptance.

Indicative dimensional tolerance limits
Parameter Indicative tolerance
Outside diameter ±0.5% or ±1.6 mm, whichever is greater (body)
Wall thickness ±8% to ±12.5% of nominal, by size and process
Length ±50 mm on random and fixed cut lengths
Straightness Typically ≤ 0.2% of total length
Ovality Within the API 5L limit for the ordered OD and wall
End bevel Per ASME B16.25 where bevelled ends are ordered

ERW and LSAW Routes for X42

The straight seam can be made by two processes, each with its own size and wall niche.

ERW at Smaller Sizes

High-frequency resistance welding forms tube from strip with a narrow heat-affected zone and no filler metal. It is efficient and dimensionally accurate from small diameters up to roughly NPS 24.

LSAW for Large Diameter and Wall

For large OD and heavy wall, plate is formed into a U and then an O and the longitudinal seam is welded inside and out by submerged arc. This gives full penetration and good dimensional control at big sizes.

Inspection and End Finish

Full-length seam examination by ultrasonic or radiographic methods.

Hydrostatic testing of each length to the ordered pressure.

Tensile and flattening or bend tests on body and weld.

Charpy impact at PSL2 at the project test temperature.

Plain or ASME B16.25 bevelled ends for field welding.

Related Products

For specification comparison, these related line-pipe pages may be useful:

X42 spiral welded line pipe

API 5L X42 pipe fusion welding

ERW X46/X52 line pipe

API 5L L290 welded pipe

Frequently Asked Questions

What is an X42 straight seam carbon welded pipe?

It is an API 5L line pipe at the X42/L290 grade whose longitudinal weld runs parallel to the axis, made by ERW at smaller sizes or by LSAW at larger diameters.

How is a straight seam formed on X42 carbon pipe?

By ERW the strip edges are heated by high-frequency current and forged together without filler; by LSAW plate is formed into a cylinder and the longitudinal joint is welded inside and out under flux.

Is X42 the same grade as L290 in metric terms?

Yes. X42 is the API 5L designation and L290 is its ISO 3183 equivalent; both mean line pipe with a minimum yield of 290 MPa.

What strength does X42 straight seam welded pipe have?

X42 has a minimum yield of 290 MPa and a minimum tensile of 415 MPa under API 5L, giving moderate pressure capability for transmission and distribution.

Which mill route makes X42 straight seam pipe - ERW or LSAW?

Both. ERW covers roughly NPS 2 to 24 with good tolerance, while LSAW from plate handles large diameters and heavy walls beyond the ERW range.

Where is X42 straight seam carbon pipe used?

It is used for onshore oil and gas lines, gas distribution, water and slurry conveyance, and general structural work where a round, moderate-strength pipe is needed.

What tests release an X42 straight seam welded pipe?

Hydrostatic testing, full-length seam NDE, tensile and flattening or bend tests, dimensional and visual checks, plus Charpy impact when PSL2 is ordered.

Can X42 straight seam pipe be supplied with bevelled ends?

Yes. Ends can be plain or bevelled to ASME B16.25, prepared so the straight seam ties into the field girth weld without misalignment.

Values shown are indicative and cross-checked against API 5L / ISO 3183 and independent mill references; final dimensions, chemistry, heat-treatment condition and test scope are governed by the purchased edition of the standard and the project data sheet.

product-750-750

Hot Tags: x42 straight seam carbon welded pipe, China x42 straight seam carbon welded pipe manufacturers, suppliers, Big Diameter LSAW Steel Pipe, Seam Steel Pipe, straight seam submerged arc welded SAWL steel pipe, Straight Seam Welded Pipe, Longitudinal Electric Resistance Weld, API 5L PSL2

Send Inquiry