A 209 Material Specification
ASTM A209 Grade T1b alloy steel seamless pipe has a typical chemistry with 0.44-0.65 Molybdenum additions. Bearing minimum tensile strength is 415 Mpa Minimum yield strength of ASTM A209 Grade T1b pipe is 220 Mpa.
Scope
1.1 This specification2 covers several grades of minimum-wall-thickness, seamless, carbon-molybdenum alloy-steel, boiler and superheater tubes.
1.2 This specification covers tubes 1/2 to 5 in. [12.7 to 127 mm] inclusive, in outside diameter and 0.035 to 0.500 in. [0.9 to 12.7 mm], inclusive, in minimum wall thickness.
1.3 An optional supplementary requirement is provided and, when desired, shall be so stated in the order.
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Chemical Components (%) of ASTM A209
| Grade | C | Si | Mn | P | S | Mo | Cr |
|---|---|---|---|---|---|---|---|
| ASTM A209 Gr T1 | 0.10-0.20 | 0.10-0.50 | 0.30-0.80 | ≤0.025 | ≤0.025 | 0.44-0.65 | / |
| ASTM A209 Gr T1a | 0.15-0.25 | 0.10-0.50 | 0.30-0.80 | ≤0.025 | ≤0.025 | 0.44-0.65 | / |
| ASTM A209 Gr T1b | 0.14max | 0.10-0.50 | 0.30-0.80 | ≤0.025 | ≤0.025 | 0.44-0.65 |
| Grade | Tensile | Yield | Elongation | Hardness |
|---|---|---|---|---|
| Strength (Mpa) | Strength (Mpa) | (%) | (HRB) | |
| ASTM A209 Gr T1 | ≥380 | ≥205 | ≥30 | ≤80 |
| ASTM A209 Gr T1a | ≥365 | ≥195 | ≥30 | ≤81 |
| ASTM A209 Gr T1b | ≥415 | ≥220 | ≥30 | ≤77 |
Hot Tags: A 209 Material Specification, China A 209 Material Specification manufacturers, suppliers, seamless carbon steel pipe, SAW Pipe, Straight Welded Seam Carbon Steel Pipeline, ASTM A335 pipes, Casing Tubing, ASTM A691 Pipe
You Might Also Like
Send Inquiry