ASTM A252 Piling Spiral Welded Ssaw Steel Pipe
video

ASTM A252 Piling Spiral Welded Ssaw Steel Pipe

Delivery Time: about 20days after receipt of irrevocable L/C at sight or 30% deposit T/T
External Coating: FBE, 2PE, 3PE,3PP etc.
Pipe end: Plain end, beveled end, PVC covered and both ends capped ,threaded and coupled
Send Inquiry
Chat Now
Product Introduction

A252 spiral welded pipe using resistance welding welding process, factory welded piles should be welded into the same acceptance of steel piles and no joints, but the tensile specimen cut from the joints must meet the tensile strength requirements specified in Table 1.
The tensile specimen cut from the joint must meet the specified tensile strength requirements. Weld beads need not be removed for this test. Finished steel pipe piles shall be reasonably straight and free from defective joints of such quantity or nature as to render the pipe unsuitable for use as a steel pipe pile. Surface imperfections not exceeding 25% of the nominal wall thickness in depth are permitted. These imperfections may be ground or sexed to determine their depth.
Surface imperfections with a depth exceeding 25% of the nominal wall thickness shall be considered as defects. Weld patching is permitted for such defects when the depth of the defect does not exceed 33%;%. Prior to welding, the defect shall be completely removed.

A252 welded steel pipe

A252 Piling Pipe Specification

Production

Spiral Welded Steel Pipe

Brand

GNEE

Standard

API 5L,API 5CT,SY/T5037,SY/T5040,GB/T9711.1,GB/T9711.2,A,B,X42-X80,L175-L555,L245NB,etc.

Material

1.0033,08F,A53,A106,Q235,Q345b,

Out Diameter

159mm-3200mm

Wall Thickness

3mm-30mm

Length

5.8m-11.8m,or as customer's requirements.

Place of Origin

Tianjin, China

Main Market

Middle East,Africa,South-east Asia,USA,Canada,South America

Delivery Time

about 20days after receipt of irrevocable L/C at sight or 30% deposit T/T

External Coating

FBE, 2PE, 3PE,3PP etc.

Pipe end

Plain end, beveled end, PVC covered and both ends capped ,threaded and coupled

ASTM A252 Piling Pipe 

A252 sprially welded steel pipe

FAQ

Q1:How about thequality?
A:Third party inspections are always welcomed, like TUV. All of the goods will be released together with MTC and stamped by TPI.
Q2: How long is the delivery time?
A: Generally about 5-10 days if the goods in stock. Or will be 15-20 days if the goods are not in stock. And alsoaccording to the quantity.
Q3:Do you provide samples? Free or not?
A: Yes, we could offer the sample for free but do not pay the cost of freight.
Q4:May I customize the steel pipe?
A:Sure you can, we can produce according to your requirement, you can send the CAD ordesign drawing.
Q5:Any value-added Services?
A:Fottunately for you,we are very experience in this industry. We have equipped our warehouse with the necessitiesto perform in-house painting,coating,pipe cutting, jointed welding, and make machanical fabricate per to request.
Q6: How about the trade terms?
A: EXW, FOB, CFR, CIF, LC will be accepted.

Hot Tags: astm a252 piling spiral welded ssaw steel pipe, China astm a252 piling spiral welded ssaw steel pipe manufacturers, suppliers, EN10217 P195 P235 P265 Spiral Welded Pipe, EN10219 Spiral Welded Steel Pipe, JIS A5525 Welded Steel Pipe, Welded Steel Tube, EN 10219 S235JRH S275J0H S275J2H Spiral Welded Pipe, ASTM A139 Welded Pipe

Send Inquiry