Socket Weld Union
Socket weld union coupling dimensions is designed and manufactured according to MSS SP-83 standard, the weight is more heavier becuase it consists of three parts that a male end, a nut and famale end. The joint can be disassembled as a pipe fitting, and the things connected through the joint can be disassembled and replaced.
MSS SP 83 socket weld union size range is from 1/8" to 3" and pressure rating is available in Class 3000 / 6000 lbs.
Socket Weld Fittings are a family of high pressure forging fittings that used only in conjunction with ANSI Pipe and are available in the same size range. Even though there are some similarities between the shapes of the two welds, but socket weld is still considered to be different from a fillet weld.
Socket Weld Union Material
| Carbon Steel | ASTM A105 / A105N |
| Low Temp Carbon Steel | ASTM A350 LF2 / LF3 |
| Pipeline Steel | ASTM A694 F42 / F46 / F56 / F60 / F65 |
| Alloy Steel | ASTM A182 F11 / F12 / F5 / F9 / F91 / F92 / F22 |
| Stainless Steel | ASTM A182 F304/304L/304H, F316/316L, F310S, F317, F347, F904, F321 |
| Duplex Stainless Steel | ASTM A182 F51, F53, F44, F55 |
MSS SP 83 Socket Weld Union Coupling Dimensions
| DN | NPS | A | B | C | D | E | F | G | H | J | K | L | N |
| 6 | 1/8 | 21.8 | 10.9 | 3.2 | 6.1 | 20.7 | 3.2 | 3.2 | 16 | 1.2 | 9.7 | 41.4 | 51 |
| 8 | 1/4 | 21.8 | 14.3 | 3.3 | 8.5 | 20.7 | 3.2 | 3.2 | 16 | 1.2 | 9.7 | 41.4 | 51 |
| 10 | 3/8 | 25.9 |
17.7 |
3.5 | 11.8 | 23.8 | 3.4 | 3.4 | 14 | 1.4 | 9.7 | 46.0 | 56 |
| 15 | 1/2 | 31.2 | 21.9 | 4.1 | 15 | 23.8 | 3.7 | 3.7 | 14 | 1.5 | 9.7 | 49.0 | 59 |
| 20 | 3/4 | 37.1 | 27.3 | 4.3 | 20.2 | 28.6 | 4.1 | 4.1 | 11 | 1.7 | 12.7 | 56.9 | 66 |
| 25 | 1 | 45.5 | 34 | 5.0 | 25.9 | 30.2 | 4.6 | 4.4 | 11 | 1.9 | 12.7 | 62.0 | 79 |
| 32 | 11/4 | 54.9 | 42.8 | 5.3 | 34.3 | 36.6 | 5.3 | 5.2 | 10 | 2.1 | 12.7 | 71.1 | 94 |
| 40 | 11/2 | 61.5 | 48.9 | 5.5 | 40.1 | 38.1 | 5.8 | 5.6 | 10 | 2.3 | 12.7 | 76.5 | 112 |
| 50 | 2 | 75.2 | 61.2 | 6.0 | 51.7 | 41.4 | 6.6 | 6.4 | 10 | 2.7 | 15.7 | 86.1 | 132 |
| 65 | 21/2 | 91.7 | 73.9 | 7.7 | 61.2 | 56.9 | 7.5 | 7.1 | 8 | 3.1 | 15.7 | 102.4 | 150 |
| 80 | 3 | 109.2 | 89.9 | 8.3 | 76.4 | 58.7 | 8.3 |
8.0 |
8 | 3.5 | 15.7 | 109.0 | 176 |
1) The even thickness around the socket bore shall not be less than the average value, the thickness at partial areas can be the min. one.
2) Considering the tolerance of outside diameter of pipe, the diameters of some socket bore can be a little larger than the ones specified in B16.11.
3) When the sizes of the connecting pipes are not conformed to the ones specified in this catalog, the sizes of the connecting pipes shall be provided in the purchase specification.
4) When the fittings are reducing,the structure sizes shall be same as the ones of the straight fittings and B J D shall be machined per the according reducing ends.
5) Fittings can also be manufactured as the mixed connectings of SW and THRD.
Hot Tags: socket weld union, China socket weld union manufacturers, suppliers, din pipe fitting, sewer pipe fitting, aboveground pipe fitting, polystyrene pipe fitting, industrial pipe fitting, copper pipe fitting
Previous
Threaded ElbowYou Might Also Like
Send Inquiry