Spiral Welded Steel Tube
video

Spiral Welded Steel Tube

APPLICABLE STANDARDS: ASTM A 252 - Grade 2/3 EN 10255 JIS A 5525, SKK400/SKK490
Send Inquiry
Chat Now
Product Introduction

ASTM A-252 Specifications

Steel Chemical Composition
The chemical composition of the steel shall conform to the following requirements:
Seamless and Welded Tubes: Martin Furnace, Basic Oxygen or Electric Furnace:
Phosphorus, Maximum (%): 0.050

Mechanical Properties

Allowed Variations
Thickness
The minimum wall thickness at any point shall not exceed 12.5% ​​of the specified nominal wall thickness.
Diameter
The outside diameter of the steel pipe pile shall not vary from the specified diameter by more than ±1%.
Length
Specified lengths with a tolerance of ±1".

Workmanship, surface treatment and appearance
Finished piles shall be reasonably straight and shall contain no defects of such quantity or nature as to render the pipe unsuitable for use as piles.
Surface defects shall be permitted up to a depth not exceeding 25% of the nominal wall thickness. The depth may be determined by grinding or filing.
Surface defects shall be considered defects when their depth exceeds 25% of the nominal wall thickness. Welding shall be permitted to repair defects when their depth does not exceed 33 ½ % of the nominal wall thickness. Defects shall be completely removed before welding.

Ends
Unless otherwise specified, material shall be flame or machine cut plain ends. When ends are specified to be beveled, they shall be beveled to 30° + 5° - 0°. All burrs shall be removed from the ends.

Number of tests
One tensile test shall be carried out on a section or portion of each size or on 200 of each lot representing each size. A section of pipe or a portion thereof shall be subjected to a tensile test.

Certification
At the request of the purchaser, in the contract or order, a certification from the manufacturer shall be provided that the material has been made and tested in accordance with this specification, together with chemical and tensile test reports.

Marking
Each pipe pile shall be clearly marked by stamping, punching or rolling to show: manufacturer's name; batch number; type of pipe; size, weight, length and wall thickness; and specification number and grade.

Hot Tags: spiral welded steel tube, China spiral welded steel tube manufacturers, suppliers, Spiral Welded Steel Pipe, API 5L Spiral Welded Carbon Steel Pipe, SY T 5037 2000 SSAW Pipe, SEAMLESS STEEL PIPE PILES, SY T5037 standard spiral steel pipe, EN10219 Spiral Welded Steel Pipe

Send Inquiry