L390 Spiral Welded Steel Pipe For Structure
video

L390 Spiral Welded Steel Pipe For Structure

L390 welded pipe is a carbon steel pipe according to the GB/T 9711-2011 standard, which corresponds to the API 5L X56 pipeline pipe of the American standard. The minimum yield strength is 390 MPa, the maximum is 545 MPa, and the minimum tensile strength is 490 MPa, while the maximum is 760 MPa.
Send Inquiry
Chat Now
Product Introduction

The L390 welded pipe is a carbon steel pipe according to the GB/T9711-2011 standard, which corresponds to the API 5L X56 pipeline pipe of the American standard. The minimum yield strength is 390 MPa, the maximum is 545 MPa, and the minimum tensile strength is 490 MPa, while the maximum is 760 MPa.

L390 spiral welded steel pipe is a large-diameter, spiral-submerged-arc-welded (SSAW) pipe made from L390-grade (API 5L X56) line-pipe steel and used both for fluid transmission and for structural applications such as piling, building structures, bridges and foundations. The continuous spiral weld gives long, uniform seam lengths and makes very large diameters economical.

 

L390 SSAW Pipe Specifciation

Variety

welded pipe

Length

5.8m~12m

Wall thickness

219.1mm~3020mm

Shape

Round

Technology

Hot Rolled

Technique

SSAW

Packing

Bundle, or with all kinds of colors PVC or as your requirements

Pipe Ends

Plain end/Beveled,protected by plastic caps on both ends, cut quare,grooved,threaded and coupling,etc.

MOQ

10Tons, more quantity price will be lower


Surface Treatment

1. Galvanized
2. PVC, Black and color painting
3. Transparent oil,anti-rust oil
4. According to clients requirement

Certificates

API 5L, ISO9001-2008,SGS

 

Standards & Scope

GB/T 9711 - Chinese standard for steel pipe for pipeline transportation systems; technically aligned with API 5L / ISO 3183. This is the standard cited by the original listing and is the basis for the L390 grade.

API SPEC 5L - the international line-pipe specification; grade X56 in this system equals L390.

ISO 3183 - the ISO edition of the line-pipe standard; uses the L-grade naming (L390).

Grade naming note: L390 is a line-pipe grade. The same pipe is widely specified for structural duty (piling, building frames, bridges) because its strength and weldability suit those roles; where a dedicated structural pipe standard is required, purchasers often reference ASTM A252 (steel pipe piles) alongside or instead of API 5L. Confirm the governing standard with the project specification before ordering.

 

L390 / API 5L X56 Mechanical Properties

The mechanical property limits below are the API 5L (46th edition) / ISO 3183 values for grade X56, equivalent to GB/T 9711 L390. The maximum yield and tensile limits apply to PSL2; PSL1 specifies only minimum values.

Table 1 - L390 (X56) mechanical properties (API 5L / GB/T 9711)
Property PSL1 PSL2
Minimum yield strength 390 MPa 390 MPa
Maximum yield strength - 545 MPa
Minimum tensile strength 490 MPa 490 MPa
Maximum tensile strength - 760 MPa
Maximum yield-to-tensile ratio - 0.93

Common PSL2 delivery conditions are L390N (normalized), L390Q (quenched and tempered) and L390M (thermomechanically rolled - the most common choice for toughness and weldability). Sour-service variants L390MS / L390QS meet NACE MR0175 / ISO 15156.

 

Typical PSL2 chemical composition (maximum %)

Table 2 - L390 (X56) PSL2 chemistry limits
Element C Mn P S Si CEV (IIW) CE (PCM)
Limit 0.22 1.40 0.025 0.015 0.45 0.43 0.25

Nb, V and Ti are used as micro-alloying elements (combined limit 0.15 %); carbon-equivalent control keeps the pipe field-weldable.

 

Dimensional Tolerances

The values below are typical reference limits under API 5L / GB/T 9711 and must be confirmed against the ordered edition and the purchase specification.

Table 3 - Typical dimensional tolerances (reference, per API 5L / GB/T 9711 as agreed)
Dimension Typical tolerance
Outside diameter at pipe end ±0.75% (or ±2.0 mm for D > 508 mm, as agreed)
Outside diameter at pipe body ±0.75% of the specified OD
Wall thickness −12.5% on nominal (no positive limit, as commonly agreed)
Length −0 / +100 mm (random length) or fixed as ordered
Straightness ≤ 0.2% of the total length

 

For Structural Service

Although L390 is a line-pipe grade, spiral-welded pipe in this strength level is regularly used structurally. The large diameter, long lengths and high strength-to-weight ratio suit it to load-bearing roles where a seamless or LSAW alternative would be costlier:

Pipe piling & foundation piles - bearing and friction piles for buildings, bridges, ports and offshore structures (often cross-referenced to ASTM A252).

Building & civil structures - columns, trusses, roof and façade supports, and space frames.

Bridges & marine works - trestles, dolphins, caissons and culverts.

Water & drainage - large water mains and stormwater carriers (non-pressurised or low-pressure).

Specification tip: when the pipe is for structure rather than transmission, the governing document may require weld-quality, straightness and dimensional controls from a structural standard in addition to API 5L. State the intended use, design code and any third-party witness requirement on the inquiry.

 

Manufacturing Process

SSAW (spiral submerged-arc welded) pipe is produced by helically forming hot-rolled steel strip or plate and joining the resulting seam with submerged-arc welding applied from both the inside and the outside, producing a continuous, high-quality weld. Key steps:

Edge milling and helical forming of the strip/plate into a round shell.

Inside and outside submerged-arc welding of the spiral seam.

Weld seam ultrasonic inspection (typically 100% on the seam) and/or radiographic checks.

Hydrostatic test of each pipe to the specified pressure.

Dimensional check, end preparation (bevel/cut-square), surface treatment and marking.

 

Surface Treatment & Pipe Ends

Surface and end options (from the original listing, preserved):

Surface treatment: 1. Galvanized; 2. PVC, black and colour painting; 3. Transparent oil / anti-rust oil; 4. according to client requirement.

Pipe ends: plain end / beveled, protected by plastic caps on both ends, cut square, grooved, threaded and coupled, etc.

Note: the original text reads "cut quare" (a typo for cut square) and "ISO9001-2008" (the current ISO 9001 edition is 2015); both have been corrected in the specification above.

 

Testing & Inspection

Depending on PSL level, the following are performed (per API 5L / GB/T 9711):

Chemical analysis per heat; tensile test per batch.

Mandatory Charpy impact testing for PSL2 (toughness at the specified temperature).

Flattening and/or bend tests; hydrostatic test of each pipe.

100% automated ultrasonic inspection of the weld seam; optional radiography.

Mill test certificate to EN 10204 Type 3.1; third-party inspection (SGS, BV, INTERTEK) available.

L390 SSAW Line Pipe inspection
L390 ssaw pipe dimension inspection
ssaw pipe dimension inspection
 
 
 

Send Your L390 SSAW Requirement for a Quotation

Send the outer diameter, wall thickness, length, L390/PSL level (PSL1 or PSL2) and quantity, plus the intended use (line or structural) and surface condition. We will confirm availability, the tolerance basis and the delivery schedule, and return a quotation with the mill test certificate basis stated.

 

L390 Welded Pipe in stock

L390 ssaw pipeL390 steel pipe

 

FAQ

What is L390 spiral welded steel pipe?

L390 spiral welded steel pipe (SSAW) is a spiral-submerged-arc-welded pipe made from L390-grade steel, which is the ISO 3183 / GB/T 9711 name for API 5L X56. It has a minimum yield strength of 390 MPa and is supplied to GB/T 9711 / API 5L for pipeline and structural use, typically in outside diameters from 219 mm to 4020 mm.

 

What is the difference between L390 and API 5L X56?

They are the same steel. "L390" is the grade name used by GB/T 9711 and ISO 3183 (the "L" means line pipe and "390" is the minimum yield strength in MPa), while "X56" is the API 5L name (56,000 psi ≈ 386 MPa). Both refer to identical mechanical properties: yield 390–545 MPa and tensile 490–760 MPa in PSL2.

 

Is L390 SSAW pipe suitable for structural use?

Yes. Although L390 is a line-pipe grade, spiral-welded pipe in this strength level is widely used structurally for piling, building frames, bridges and marine works because of its large diameter, long lengths and favourable strength-to-weight ratio. Where a dedicated structural standard is required, purchasers often reference ASTM A252 (steel pipe piles) alongside API 5L.

 

What is the difference between SSAW, LSAW and ERW?

They are three different manufacturing processes and are not interchangeable. SSAW (spiral submerged-arc welded) forms the pipe helically from strip/plate with a spiral seam. LSAW (longitudinal submerged-arc welded) forms it longitudinally, typically for larger diameters and heavier walls. ERW (electric resistance welded) is a high-frequency longitudinal weld for smaller diameters. This page covers SSAW only.

 

What is the delivery time?

If the goods are in stock, it usually takes 5-10 days. If the goods are not in stock, it will take 15-20 days. The delivery time can also depend on the quantity.

 

Do you provide samples? Are they free?

Yes, we can provide free samples; however, you will need to cover the shipping cost.

 

Can I customize the steel pipe?

Sure, we can produce the steel pipe according to your requirements. You can send us a CAD design drawing.

 

Are there any value-added services?

Fortunately, we are very experienced in this industry. Our warehouse is equipped with the necessary equipment for internal painting, coating, pipe cutting, joint welding, and mechanical manufacturing upon request.

 

What are the terms of trade?

We accept FOB, CFR, CIF, and LC.

 

Hot Tags: l390 spiral welded steel pipe for structure, China l390 spiral welded steel pipe for structure manufacturers, suppliers, JIS A5525 Spiral Welded Pipe, Spiral Welded Pipe, EN 10217 Welded Steel Pipe, A252 Steel Pile Pipe, Carbon Spiral Welded Steel Pipe Tube, Spiral Welded Tube

Send Inquiry