E235 Welded Square Steel Tube For Construction
E235 welded square steel tube is a cold-sized precision E235 square hollow section made from non-alloy steel E235 (material number 1.0308) and supplied to EN 10305-5. It carries a +N minimum yield of 235 MPa (34,000 psi) and edge-length tolerance as tight as ±0.20 mm on small sections, rising to ±0.65 mm on a 100 mm side. That combination of known yield and tight, repeatable geometry is why it is chosen for construction where the section is visible, robot-welded or fitted with inserts.
The single number that decides your design is the delivery condition: the same E235 tube is 235 MPa yield in the normalized state but about 385–480 MPa in the cold-finished state. Pick the state from the duty, not from habit - the rest of this page shows how. In short, this is a welded square tube for construction that fits visible and machined assemblies without rework. Send your dimensions and delivery condition for a quote.
Technical Specifications
The E235 dimensions table below lists the production range we hold and roll; confirm any size outside it before ordering.
| Parameter | Capability |
|---|---|
| Standard | EN 10305-5 (welded and cold-sized square and rectangular tubes) |
| Grade / material no. | E235 / 1.0308 |
| Section (H × B) | 15 × 15 mm to 120 × 120 mm (≈0.59 × 0.59 in to 4.72 × 4.72 in); rectangular on request |
| Wall thickness | 1.0 mm to 4.0 mm (≈0.04 in to 0.16 in) |
| Edge-length tolerance | ±0.20 mm (15–20 mm) to ±0.65 mm (100 mm side) |
| Length | 6 m standard (+50/0 mm); exact lengths on request |
| Delivery condition | +N, +C, +LC, +SR, +A |
| Surface condition | Black (S1), pickled (S2), cold-rolled (S3), coated (S4); suitable for hot-dip galvanizing |
| Certificate | EN 10204 2.2 / 3.1; third-party inspection available |
Chemical Composition
| Element | E235 (max) | Note |
|---|---|---|
| Carbon (C) | 0.17 | Low carbon, easy to weld |
| Silicon (Si) | 0.35 | Deoxidation |
| Manganese (Mn) | 1.20 | Strength and toughness |
| Phosphorus (P) | 0.025 | Tightened from 0.045 in the 2010 edition |
| Sulfur (S) | 0.025 | Tightened from 0.045 in the 2010 edition |
| Aluminium total (Al) | 0.015 min | Grain refinement (Option 1) |
E235 chemical composition is fixed by EN 10305-5 Table 2. The 0.025 % phosphorus and sulfur ceilings are the current 2016 values; the older 2010 edition allowed 0.045 %, so a certificate quoting the 2010 limits is not to the latest edition.
Mechanical Properties
The table below lists E235 mechanical properties by delivery condition; the yield is what your design is checked against.
| Delivery condition | Tensile Rm (MPa) | Yield ReH (MPa) | Elongation A (%) |
|---|---|---|---|
| +C (cold finished) | 480 | ≥0.8×Rm (≈385+) | 6 |
| +LC (cold finished, softened) | 420 | ≥0.7×Rm | 10 |
| +SR (stress relieved) | 420 | 350 | 16 |
| +A (annealed) | 315 | - | 25 |
| +N (normalized) | 340–480 | 235 | 25 |
The elongation falls as the tube is cold-worked: +N gives 25 % but +C only 6 %, the price paid for the higher yield. Very small sections (OD ≤30 mm, wall ≤3 mm) may carry a ReH 10 MPa lower by the standard's note.
E235 vs S235 - Precision vs Structural
| Dimension | E235 / EN 10305-5 | S235 / EN 10219 |
|---|---|---|
| Minimum yield | 235 MPa (+N) | 235 MPa (S235JRH) |
| Tensile | 340–480 MPa (+N) | 360–510 MPa (S235JRH) |
| Edge tolerance (100 mm side) | ±0.65 mm | ±1 % (≈±1.0 mm) |
| Typical use | Machinery, automotive, furniture, visible structures | Building columns, trusses, frames |
| Grade marking | Letter E | Letter S (JRH/J0H/J2H with impact) |
Same ~235 MPa yield, different tolerance and purpose. A construction drawing that names S235JRH expects the EN 10219 structural section; specify E235 only when the tighter tolerance or the bright finish is what the job needs. By contrast, a cold formed welded square tube to EN 10219 (S235JRH) uses the looser tolerance and is the usual building-frame choice. One section can be supplied to both standards, so the deciding factor is the tolerance class the design requires.
Selecting the Right Grade and Product Form
E235 vs E275 vs E355
| Grade | +N yield (MPa) | Typical use |
|---|---|---|
| E235 (1.0308) | 235 | General structures, frames, furniture |
| E275 | 275 | Heavier frames, moderate load |
| E355 (1.0580) | 355 | High-load, weight-critical structures |
Move up the ladder only when +N E235 cannot carry the load at the wall you want; for most construction frames E235 is the economical default. The E235 equivalent ASTM A500 grade is A500 Grade B - a close, not exact, match covered in the FAQ.
Cold sized vs structural hollow section
| Route | Edge tolerance | Strength of the route |
|---|---|---|
| EN 10305-5 (cold sized) | ±0.20–0.65 mm | Tight fit, bright finish, insert-friendly |
| EN 10219 (cold formed structural) | ≈±1 % of side | Lower cost, CE/CPR marking for building use |
Both meet a 235 MPa yield; only the tolerance class and the certification path differ, so the route follows what the structure is asked to do.
Dimensional Tolerances and Surface Finish
The EN 10305-5 tolerance schedule below sets how tightly a square section is held; tighter limits are available through Option clauses.
| Section (H × B) | Edge tolerance (mm) | Wall thickness T | Wall tolerance |
|---|---|---|---|
| 15 × 15 to 20 × 20 | ±0.20 | T ≤ 1.5 mm | ±0.15 mm |
| 25 × 25 to 35 × 35 | ±0.25 | T > 1.5 mm | ±0.1T or ±0.35 mm (smaller) |
| 40 × 40 to 50 × 50 | ±0.30 | - | - |
| 100 × 100 | ±0.65 | - | - |
Beyond edges, straightness is ≤0.0015× length (local ≤3 mm/m), squareness ≤1°, twist ≤3 mm on small sections or ≤B/10 on larger ones, and standard length is 6 m (+50/0 mm). Surface roughness is about Ra ≤4 µm on the formed faces; the weld seam area is not graded for roughness. Tighter limits are available through EN 10305-5 Option clauses.
Applications
An E235 square steel tube (square hollow section) earns its place wherever the section's own accuracy and finish drive assembly cost or appearance. Five applications cover most orders:
Building Frames and Trusses
For frames where nodes are jig-welded or robot-welded, the tight edge tolerance of EN 10305-5 keeps fit-up consistent and cuts shimming and rework.
Visible Architectural Structures
Balustrades, canopies and exposed columns benefit from the smooth, uniform surface of a cold-sized tube, so less filling and grinding is needed before coating.
Machinery and Equipment Structures
Machine bases, guards and supports use E235 because holes, inserts and bushings locate predictably in a section whose dimensions repeat batch to batch.
Furniture and Display
Tables, shelving and shop fittings call for clean corners and a bright or coated finish - exactly what the precision family delivers.
Racking and Material Handling
Warehouse racking and trolley frames take the +N yield directly and gain from straight, square-cut lengths that stack and bolt without fight.
Choosing the Delivery Condition
| Duty | Recommended condition | Reason |
|---|---|---|
| Welded, then machined or formed | +N or +SR | High elongation, low hardness |
| Minimum weight / section size | +C or +LC | Maximum yield from the wall |
| Coat-ready visible structure | +N, pickled | Smooth surface, easy welding |
| Non-critical, cost-led member | +A | Softest, easiest to cut |
Quality Control and Testing
Chemical and tensile verification from the cast, reported on the EN 10204 certificate (2.2 or 3.1).
Dimensional check of edge length, wall thickness, squareness and straightness against the ordered tolerance class.
Weld integrity - longitudinal seam checked per the product standard; leak test where specified.
Surface and visual inspection for defects, with deburring and coating as ordered.
Third-party inspection available on request for project or export requirements.
Why Source E235 Square Tube from GNEE
Stock and rolling cover 15×15 to 120×120 mm squares in E235, with E275/E355 on request.
All sections supplied with EN 10204 2.2 / 3.1 and full chemical and mechanical data.
Cutting, deburring, pickling and coating handled in-house; third-party inspection supported.
Technical team confirms delivery condition and tolerance class against your drawing before quotation.
E235 Square Tube in Stock

Send your section (H × B), wall thickness, delivery condition and quantity - our technical team will confirm the specification against your drawing and return a quotation with lead time.
Request an E235 Welded Square Steel Tube Quote
FAQ
What is E235 steel and what does the grade number mean?
E235 is a non-alloy quality carbon steel in the EN 10305 precision-tube series, with material number 1.0308. In E235 the number 235 is the minimum yield strength in the normalized (+N) delivery condition - 235 MPa (34,000 psi). The same grade reaches roughly 385–480 MPa yield in the cold-finished (+C) condition, so the grade name always refers to the +N value, not the tensile or the cold-worked value.
What is the difference between E235 (EN 10305-5) and S235 (EN 10219)?
Both have about 235 MPa yield, but they belong to different standard families. E235 is a precision tube to EN 10305-5 with tight edge tolerance (±0.20–0.65 mm on a 100 mm side) for machinery, automotive, furniture and visible structures. S235 is a cold-formed welded structural hollow section to EN 10219-1/-2 (grades S235JRH/J0H/J2H) with looser tolerance (about ±1% of side) for building frames and trusses. Do not substitute one for the other unless the tighter tolerance or the impact-tested S-grade is what the drawing actually requires.
How much stronger is E235 in the +C condition than in +N?
In the +N (normalized) condition E235 has a minimum yield of 235 MPa. In the +C (cold-finished) condition yield rises to about 385–480 MPa because cold work strain-hardens the wall. For a constant wall thickness that is roughly 60–100% more load capacity, which is why +C sections are specified where weight or section size must be minimized. The trade-off is lower elongation (6% vs 25%).
What dimensional tolerances apply to EN 10305-5 square tubes?
Edge length H and B tolerance runs from ±0.20 mm on a 15–20 mm section to ±0.65 mm on a 100×100 mm section. Wall thickness tolerance is ±0.15 mm for T ≤ 1.5 mm, and ±0.1T or ±0.35 mm (whichever is smaller) for T > 1.5 mm. Straightness is ≤0.0015× length, squareness ≤1°, and standard length is 6 m (+50/0 mm) with exact lengths available on request.
Can EN 10305-5 E235 tube be used for structural construction?
Yes, for construction elements where dimensional accuracy, a smooth finish or insert-fit joints matter - visible architectural frames, robot-welded trusses, racking and machinery structures. If the project only needs a load-bearing column or frame and specifies S235JRH to EN 10219, that structural section is usually the lower-cost choice. A single section can be supplied to both EN 10305-5 and EN 10219, so confirm which tolerance class the design actually calls for.
What is the North American equivalent of E235 square tube?
The closest North American grade is ASTM A500 Grade B. A500 Gr.B round hollow section has a 42 ksi (290 MPa) minimum yield, slightly above E235+N at 235 MPa, while A500 Gr.B shaped sections are 46 ksi (315 MPa). It is a close match, not a full equivalent, so confirm the yield, tolerance and certificate requirements on the project specification before substituting.
Is E235 easy to weld?
Yes. E235 is a low-carbon steel (C ≤ 0.17%, Mn ≤ 1.20%) with a calculated IIW carbon equivalent of about 0.37, so it welds readily with ordinary processes and normally needs no preheat on typical wall thicknesses. Note that the +C cold-finished condition is harder and less ductile than +N, so stress-relieve or select +N/+SR when post-weld machining or forming is involved. The mill test certificate does not print CEV automatically - request it on the order.
How should I specify an E235 welded square tube order?
State: standard and grade (EN 10305-5 E235), delivery condition (+N, +C, +LC or +SR), outside dimensions (H × B) and wall thickness, length and quantity, surface condition (black, pickled, cold-rolled or coated), any tighter tolerance option, certificate type (EN 10204 2.2 / 3.1), and destination port. Send these and our team returns a quotation with lead time.
Hot Tags: e235 welded square steel tube for construction, China e235 welded square steel tube for construction manufacturers, suppliers, JIS G3466 Structural Pipe, CS JIS G3454 tubes, Structural Pipe, SA178 Boiler Tubes, Rectangle SA135 Pipes, ASTM A500 Welded Pipe
You Might Also Like
Send Inquiry













